This guide shows how to read GTIN + Serial fields from GS1 Datamatrix code and write information to the RFID tag using Sgtin-198 coding. EPC size on the tag must be at least 198-bit


The barcode reader must be configured to read the Datamatrix code and support the GS1 field separation marks.


Separated fields are GTIN (01) Serial (21)

Imager configuration for datamatrix field separation
Read this. The scanner beam shut off immediately after a successful reading

A qr code with black squares Description automatically generated

Saving settings to imager:
Read this: The scanner beam shuts off immediately after a successful reading.

Barcode

 

Testing
- Run RMCv3 app (app installing guide)
- Approve all permissions
- Press “Load Application” àtype “dm_to_tag”


Tag EPC size must be at least 198-bit
Read code below and write info to tag
Result EPC should be: 367B37E300AED0A0B464CD8B3000000000000000000000000000

A close up of numbers AI-generated content may be incorrect. A black and white qr code AI-generated content may be incorrect. 

this page:
https://nidsolutions.freshdesk.com/a/solutions/articles/60001506973?lang=en&portalId=60000019002