ELECTRICAL AND MECHANICAL SPECIFICATIONS


UHF RFID DATA
Supported standardISO 18000-63 (EPC Class 1 Gen2v2)
FrequencyETSI 865.6–867.6 MHz or FCC/IC 902–928 MHz
Integrated antenna features
Circular polarization with very low axial ratio
Maximum radiated RF power 33dBm (2W) ERP / 3.3W EIRP
Max receiver sensitivity
-87 dBm
Reading speed
Reading speed
Reading speed
1 RP-TNC female with maximum conducted power 30dBm
PLATFORM
CPUDual-core 64bit A53 with quad-core R5F co-CPUs
Operating system
Hardened Linux
Memory
2GB RAM, 8GB Flash
USER INTERFACE
Indicators&pcs status LEDs, 2pcs high visibility LED bars
LANEthernet 10/100/1000mbit, Connector: M12 A-coded 8 pin
USBUSB composite device (CDC/HID/RNDIS/ECM),Connector:M12 A-coded 8pin
IO1 input and 1 output, 24V output for powering sensors
POWER
Operating power12W with maximum RF transmission power on, 4W in idle state, RF not transmitting
External power supply
AC adapter: input 100–240 VAC, 1 A, 50-60 Hz / output 24 VDC, 1.25A, 30W / Power adapter for EU, UK or US Connector: M12 L-coded (FE connected)
SIZE AND WEIGHT
DimensionsH 200 mm W 200 mm L 28 mm
Weight
1.1 kg / 38.8 oz
SOFTWARE INTERFACE
Management
interface 		Via Web management UI and SSH for developers
Firmware update
Via Web management UI and the RESTful service
IP addressing
IPv4 DHCP (DCP in PNIO mode) or static IP
API support
NUR API for RFID and RESTful service to access reader configurations, IRP API for PNIO
Security
TSL v1.3
Industrial protocols
OPC UA AutoID server support Profinet IO device CC-B with 1ms cycle time
Software
development 		Application can be written with modern programming languages. Internal RPC library for C++/Rust/Python/C#
ENVIRONMENT
Temperature
Operating Storage -20 to +55 °C -4 to +131°F -20 to +60 °C -4 to +140 °F
Relative humidity
10 % to 95 % non-condensing
Mounting
VESA 100 compatible
Environmental sealing
IP67
Shock and vibration
EN60068-2-27 / EN60068-2-6(4)
ESD
Contacts Air discharge +/- 4kVdc +/- 8kVdc