| UHF RFID |
| Supported standard Frequency band Regulatory | ISO 18000-63 (EPC Class 1 Gen2 V2) AES authentication in accordance with ISO/IEC 29167-10 supported ETSI 865.6–867.6 MHz and FCC/IC 902–928 MHz CE ETSI EN 302 208, CE ETSI EN 301 489, FCC part 15.247 IC RSS-210, Safety IEC 62368-1:2019 ed. 3 |
| Typical reading speed | 200 tags/s in DRM mode |
| Radiated power (integrated antenna) | Maximum (aka normal gain mode): 30dBm (1 W) ERP / 1.6 W EIRP Minimum (aka low gain mode): 1dBm (1.3mW) ERP / 2mW EIRP |
| Integrated antenna features | Wide band antenna which covers ETSI and FCC/IC frequency bands 7 dBic circular polarized, Beam width 80°, Nominal reading distance 5 m / 16 ft |
| Conducted power for external antenna ports | 27 dBm (500mW) |
| External antenna port | 3 pcs. 50 Ω / SMA Female |
| Isolation between external antenna ports | 35 dB / typical |
| PLATFORM |
| CPU | 1.2GHz 64-bit Quad-Core Cortex-A53 processor |
| Operating system | Debian based embedded Linux |
| Memory | 1 GB RAM 4 GB flash |
| USER INTERFACE |
| USB | USB host, type A USB device, type B, USB HID class supported |
| SIM | Mini-SIM |
| Indicators | 4 pcs (programmable) LEDs Buzzer for sound indications, Capacitive sensor for triggering reading |
| CONNECTIVITY |
| GPIO | 4 inputs, opto isolated, max. 24V 4 outputs, opto isolated, max. 50mA |
| Wireless WAN (optional) | 3G HSPA (B1, B2, B5, B6, B8 and B19) 2G GPRS / EDGE (850, 900, 1800 and 1900 MHz) |
| LAN | Ethernet 10/100 Mbit |
| Wireless LAN (optional) | IEEE 802.11 a/b/g/n, works as an WLAN access point for other Nordic ID readers Dual band WLAN, supports 2.4 GHz and 5 GHz networks |
| POWER |
| External Power Supply | PoE 802.3af or AC/DC adapter: input 100-240 VAC, 1A, 50-60 Hz / output 24 VDC, 1.25A |
| Operating Power | 12W PoE, 20 W DC Note! Wireless LAN and WAN disabled in PoE use |
| SIZE AND WEIGHT |
| Dimensions | (W) 200 x (L) 260 x (H) 25 mm ((W) 7.9 x (L) 10.2 x (H) 1.0 inch) |
| Weight | 530g / 18.7 oz |
| ENVIRONMENT |
| Environmental sealing | IP20, for indoor use only |
| Inbox content | Nordic ID Sampo S2 and installation screws (power supply not included) |
| Operating Temperature | -20 to 55 °C (-4 to 130 °F) |
| Storage Temperature | -40 to 85 °C (-40 to 185 °F) |
| SOFTWARE INTERFACE |
| Data management | Nordic ID Radea |
| Device management | Nordic ID Radea, SOTI® |
| Firmware update | Via Web management UI and the RESTful service |
| Management interface | Web management UI and SSH for developers |
| IP Address configuration | IPv4/IPv6 DHCP or Static IP |
| API support | NUR API for RFID and RESTful service to access reader configuration |
| Other protocols | LLRP |
| Software development | Ready-to-use Nordic ID NUR API that provides full control over the reader Application can be written with modern programming languages* Compatible with existing Nordic ID fixed readers |